Speed up proofing times
Using a steam generator allows to control humidity value inside the proofer/proofer cabinet, creating ideal environment conditions to speed up and optimize the proofing process.
Recommended for soft and no-wet products
Steam generator is specifically indicated for soft and no-wet results.
The injection steam generator blows 110°C steam directly inside ventilation system, drastically cutting down air condensation on inside walls. Also limestone maintenance is reduced, due to a specific kind of water check.
Intense usage resistant
The use of stainless steel for inside structural parts, such as boiler and resistances, offers better performance against effects of prolonged exposition to steam corrosive power.
Easy to install
Limited overall dimensions and under pressure steam outlet allow it to be easily installed outside the proofer, without the need for aspirator or any other ducting elements. Also, steam generator can be installed on the wall, in case the space above the room does not have the necessary height.
|Model||Production per hour
|Pressure inlet water
||1||1 - 5
||3,5||1 - 5||44x21x35h||400V-3-50Hz||3000||7,5|